A molecular sheaf: doubly threaded [6]rotaxane.

We report that the use of a hydrogen-bonded pyrimidine-macrocycle complex can efficiently facilitate the threading of two bispyridinium ethylenes into four rings, as evidenced by X-ray crystallography of its precursor, offering a rare example of a doubly threaded [6]rotaxane in 91% yield. The unusual architecture is found to be stable with no dethreading despite the large ring size of the macrocycle with respect to the stopper.

Inefficient antiviral response in reconstituted small-airway epithelium from chronic obstructive pulmonary disease patients following human parainfluenza virus type 3 infection.

Chronic obstructive pulmonary disease (COPD) affects over 250 million individuals globally and stands as the third leading cause of mortality. Respiratory viral infections serve as the primary drivers of acute exacerbations, hastening the decline in lung function and worsening the prognosis. Notably, Human Parainfluenza Virus type 3 (HPIV-3) is responsible for COPD exacerbations with a frequency comparable to that of Respiratory Syncytial Virus and Influenza viruses. However, the impact of HPIV-3 on respiratory epithelium within the context of COPD remains uncharacterized.In this study, we employed in vitro reconstitution of lower airway epithelia from lung tissues sourced from healthy donors (n = 4) and COPD patients (n = 5), maintained under air-liquid interface conditions. Through a next-generation sequencing-based transcriptome analysis, we compared the cellular response to HPIV-3 infection.Prior to infection, COPD respiratory epithelia exhibited a pro-inflammatory profile, notably enriched in canonical pathways linked to antiviral response, B cell signaling, IL-17 signaling, and epithelial-mesenchymal transition, in contrast to non-COPD epithelia. Intriguingly, post HPIV-3 infection, only non-COPD epithelia exhibited significant enrichment in interferon signaling, pattern recognition receptors of viruses and bacteria, and other pathways involved in antiviral responses. This deficiency could potentially hinder immune cell recruitment essential for controlling viral infections, thus fostering prolonged viral presence and persistent inflammation.

Numerical simulation of ultrawideband supercontinuum generation covering a 2-20 µm waveband in cascaded all-soft-glass fiber.

We designed a cascaded all-soft-glass fiber structure and simulate midinfrared 2-20 µm ultrawideband supercontinuum (SC) generation numerically. The cascaded fiber structure consists of a 1.5 m I n F 3 fiber, a 0.2 m chalcogenide photonic crystal fiber, and a 0.2 m tellurium-based chalcogenide photonic crystal fiber. Using a 2 µm pulse pumping this cascaded structure, the generated SC covering the wavelengths longer than 20 µm has been demonstrated theoretically. The 30 dB bandwidth reaches 20.87 µm from 1.44 to 22.31 µm. The effect of different pulse widths on SC generation is considered. With the increase of peak power and the decrease of pulse width, the energy of SC in the 15-20 µm waveband increases gradually. The mechanism of SC broadening process has also been analyzed. The SC generation of more than 20 µm in this cascade structure is caused by the self-phase modulation, soliton effects, four-wave mixing, and redshifted dispersive wave. This method demonstrates the possibility of generating ultrawide bandwidth SCs up to a 20 µm waveband by a commercial 2 µm pump source and all-fiber structure.

Enhancing the Weld Quality of Polylactic Acid Biomedical Materials Using Rotary Friction Welding.

Polylactic acid (PLA) stands out as a biomaterial with immense potential, primarily owing to its innate biodegradability. Conventional methods for manufacturing PLA encompass injection molding or additive manufacturing (AM). Yet, the fabrication of sizable medical devices often necessitates fragmenting them into multiple components for printing, subsequently requiring reassembly to accommodate the constraints posed by the dimensions of the AM platform. Typically, laboratories resort to employing nuts and bolts for the assembly of printed components into expansive medical devices. Nonetheless, this conventional approach of jointing is susceptible to the inherent risk of bolts and nuts loosening or dislodging amid the reciprocating movements inherent to sizable medical apparatus. Hence, investigation into the joining techniques for integrating printed components into expansive medical devices has emerged as a critical focal point within the realm of research. The main objective is to enhance the joint strength of PLA polymer rods using rotary friction welding (RFW). The mean bending strength of welded components, fabricated under seven distinct rotational speeds, surpasses that of the underlying PLA substrate material. The average bending strength improvement rate of welding parts fabricated by RFW with three-stage transformation to 4000 rpm is about 41.94% compared with the average bending strength of PLA base material. The average surface hardness of the weld interface is about 1.25 to 3.80% higher than the average surface hardness of the PLA base material. The average surface hardness of the weld interface performed by RFW with variable rotational speed is higher than the average surface hardness of the weld interface performed at a fixed rotating friction speed. The temperature rise rate and maximum temperature recorded during RFW in the X-axis of the CNC turning machine at the outer edge of the welding part surpassed those observed in the internal temperature of the welding part. Remarkably, the proposed method in this study complies with the Sustainable Development Goals due to its high energy efficiency and low environmental pollution.

Gingerenone A Attenuates Ulcerative Colitis via Targeting IL-17RA to Inhibit Inflammation and Restore Intestinal Barrier Function.

Ulcerative colitis (UC) is a complicated and recurrent intestinal disease. Currently available drugs for UC treatment are scarce, therefore, novel therapeutic drugs for the UC are urgently to be developed. Gingerenone A (GA) is a phenolic compound known for its anti-inflammatory effect, but its effect on UC remains unknown. Here, it is shown that GA protects mice against UC, which is closely associated with inhibiting intestinal mucosal inflammation and enhancing intestinal barrier integrity in vivo and in vitro. Of note, RNA sequencing analysis demonstrates an evident correlation with IL-17 signaling pathway after GA treatment, and this effect is further corroborated by Western blot. Mechanistically, GA directly interacts with IL-17RA protein through pull-down, surface plasmon resonance analysis and molecular dynamics simulation. Importantly, lentivirus-mediated IL-17RA/Act1 knock-down or GA co-treatment with brodalumab/ixekizumab significantly impairs the protective effects of GA against DSS-induced inflammation and barrier dysfunction, suggesting a critical role of IL-17RA signaling for GA-mediated protection against UC. Overall, these results indicate that GA is an effective agent against UC mainly through the direct binding of IL-17RA to inhibit inflammatory signaling activation.

Effect of Zinc and Severe Plastic Deformation on Mechanical Properties of AZ61 Magnesium Alloy.

This study investigates the effects of zinc (4 wt.%) and severe plastic deformation on the mechanical properties of AZ61 magnesium alloy through the stir-casting process. Severe plastic deformation (Equal Channel Angular Pressing (ECAP)) has been performed followed by T4 heat treatment. The microstructural examinations revealed that the addition of 4 wt.% Zn enhances the uniform distribution of ß-phase, contributing to a more uniformly corroded surface in corrosive environments. Additionally, dynamic recrystallization (DRX) significantly reduces the grain size of as-cast alloys after undergoing ECAP. The attained mechanical properties demonstrate that after a single ECAP pass, AZ61 + 4 wt.% Zn alloy exhibits the highest yield strength (YS), ultimate compression strength (UCS), and hardness. This research highlights the promising potential of AZ61 + 4 wt.% Zn alloy for enhanced mechanical and corrosion-resistant properties, offering valuable insights for applications in diverse engineering fields.

Advancing 3D Dental Implant Finite Element Analysis: Incorporating Biomimetic Trabecular Bone with Varied Pore Sizes in Voronoi Lattices.

The human mandible's cancellous bone, which is characterized by its unique porosity and directional sensitivity to external forces, is crucial for sustaining biting stress. Traditional computer- aided design (CAD) models fail to fully represent the bone's anisotropic structure and thus depend on simple isotropic assumptions. For our research, we use the latest versions of nTOP 4.17.3 and Creo Parametric 8.0 software to make biomimetic Voronoi lattice models that accurately reflect the complex geometry and mechanical properties of trabecular bone. The porosity of human cancellous bone is accurately modeled in this work using biomimetic Voronoi lattice models. The porosities range from 70% to 95%, which can be achieved by changing the pore sizes to 1.0 mm, 1.5 mm, 2.0 mm, and 2.5 mm. Finite element analysis (FEA) was used to examine the displacements, stresses, and strains acting on dental implants with a buttress thread, abutment, retaining screw, and biting load surface. The results show that the Voronoi model accurately depicts the complex anatomy of the trabecular bone in the human jaw, compared to standard solid block models. The ideal pore size for biomimetic Voronoi lattice trabecular bone models is 2 mm, taking in to account both the von Mises stress distribution over the dental implant, screw retention, cortical bone, cancellous bone, and micromotions. This pore size displayed balanced performance by successfully matching natural bone's mechanical characteristics. Advanced FEA improves the biomechanical understanding of how bones and implants interact by creating more accurate models of biological problems and dynamic loading situations. This makes biomechanical engineering better.

Enhancing the Cooling Efficiency of Aluminum-Filled Epoxy Resin Rapid Tool by Changing Inner Surface Roughness of Cooling Channels.

In low-pressure wax injection molding, cooling time refers to the period during which the molten plastic inside the mold solidifies and cools down to a temperature where it can be safely ejected without deformation. However, cooling efficiency for the mass production of injection-molded wax patterns is crucial. This work aims to investigate the impact of varying surface roughness on the inner walls of the cooling channel on the cooling efficiency of an aluminum-filled epoxy resin rapid tool. It was found that the cooling time for the injection-molded products can be determined by the surface roughness according to the proposed prediction equation. Employing fiber laser processing on high-speed steel rods allows for the creation of microstructures with different surface roughness levels. Results demonstrate a clear link between the surface roughness of cooling channel walls and cooling time for molded wax patterns. Employing an aluminum-filled epoxy resin rapid tool with a surface roughness of 4.9 µm for low-pressure wax injection molding can save time, with a cooling efficiency improvement of approximately 34%. Utilizing an aluminum-filled epoxy resin rapid tool with a surface roughness of 4.9 µm on the inner walls of the cooling channel can save the cooling time by up to approximately 60%. These findings underscore the significant role of cooling channel surface roughness in optimizing injection molding processes for enhanced efficiency.

Mechanical and Corrosion Tests for Magnesium-Zinc/Ti-6Al-4V Composites by Gravity Casting.

A new Mg-4Zn X Ti-6Al-4V (TC4, of 0, 1, and 3 wt.%) alloy was successfully fabricated by a simple and low-cost gravity casting method and heat treatment at 150 °C for 24 h. The composite was examined by XRD, uniaxial tests, FESEM/EDS, potentiostat/EIS, and immersion tests for the material's microstructures, mechanical properties, electrochemical characteristics, and corrosion resistance. Experimental results indicate that heat treatment enables the precipitation of Zn along the Mg grain boundaries and drives the co-precipitation of Al around the TC4 particles and nearby grain boundaries. Uniaxial tensile tests reveal that TC4 reinforces the Mg-Zn matrix material with higher elastic modulus, ultimate tensile stress, and toughness. The heat treatment further enhanced these mechanical properties. Electrochemical tests show that 1 wt.% TC4 composite exhibits the highest open circuit potential among all tested samples, which implies the 1 wt.% TC4-added Mg-Zn is better resistant to the oxidation of the essential metals Mg, Zn, and Al. The immersion tests in the HBSS solution further show that the 1 wt.% TC4 composite has the lowest rise of pH values after 14 days, and EDS for the corroded surface signifies that Mg is the main element vulnerable to oxidation by corrosion.

Recurrence Pattern Is an Independent Surgical Prognostic Factor for Long-Term Oncological Outcomes in Patients with Hepatocellular Carcinoma.

BACKGROUND: The perioperative outcomes of a partial hepatectomy for hepatocellular carcinoma (HCC) have improved. However, high recurrence rates after a curative hepatectomy for HCC is still an issue. This study aimed to analyze the difference between various recurrence patterns. METHODS: We retrospectively reviewed 754 patients with HCC who underwent a curative hepatectomy between January 2012 and March 2021. Patients with recurrent events were categorized into three types: regional recurrence (type I), multiple intrahepatic recurrence (type II), or presence of any distant metastasis (type III). RESULTS: The median follow-up period was 51.2 months. Regarding recurrence, 375 (49.7%) patients developed recurrence, with 244 (32.4%), 51 (6.8%), and 80 (10.6%) patients having type I, II, and III recurrence, respectively. Type III recurrence appeared to be more common in male patients and those with major liver resection, vascular invasion, a large tumor size (>5 cm), a higher tumor grade, and higher levels of AST and AFP (p < 0.05). Patients who had distant metastasis at recurrence had the shortest recurrence time and the worst overall survival (p < 0.001 and p < 0.001). CONCLUSIONS: our study demonstrated that recurrence with distant metastasis occurred earliest and had the worst outcome compared to regional or multiple intrahepatic recurrences.

Abnormal expression of PRKAG2-AS1 in endothelial cells induced inflammation and apoptosis by reducing PRKAG2 expression.

PRKAG2 is required for the maintenance of cellular energy balance. PRKAG2-AS1, a long non-coding RNA (lncRNA), was found within the promoter region of PRKAG2. Despite the extensive expression of PRKAG2-AS1 in endothelial cells, the precise function and mechanism of this gene in endothelial cells have yet to be elucidated. The localization of PRKAG2-AS1 was predominantly observed in the nucleus, as revealed using nuclear and cytoplasmic fractionation and fluorescence in situ hybridization. The manipulation of PRKAG2-AS1 by knockdown and overexpression within the nucleus significantly altered PRKAG2 expression in a cis-regulatory manner. The expression of PRKAG2-AS1 and its target genes, PRKAG2b and PRKAG2d, was down-regulated in endothelial cells subjected to oxLDL and Hcy-induced injury. This finding suggests that PRKAG2-AS1 may be involved in the mechanism behind endothelial injury. The suppression of PRKAG2-AS1 specifically in the nucleus led to an upregulation of inflammatory molecules such as cytokines, adhesion molecules, and chemokines in endothelial cells. Additionally, this nuclear suppression of PRKAG2-AS1 facilitated the adherence of THP1 cells to endothelial cells. We confirmed the role of nuclear knockdown PRKAG2-AS1 in the induction of apoptosis and inhibition of cell proliferation, migration, and lumen formation through flow cytometry, TUNEL test, CCK8 assay, and cell scratching. Finally, it was determined that PRKAG2-AS1 exerts direct control over the transcription of PRKAG2 by its binding to their promoters. In conclusion, downregulation of PRKAG2-AS1 suppressed the proliferation and migration, promoted inflammation and apoptosis of endothelial cells, and thus contributed to the development of atherosclerosis resulting from endothelial cell injury.

Isolation of Lactobacillus acidophilus strain and its anti-obesity effect in a diet induced obese murine model.

Intestinal microbiota is a potential determinant of obesity, with probiotic bile salt hydrolase (BSH) as one of the key mechanisms in the anti-obesity effects. In this study, we present a Lactobacillus acidophilus GOLDGUT-LA100 (LA100) with high BSH activity, good gastric acid and bile salt tolerance, and a potential anti-obesity effect. LA100's anti-obesity effects were evaluated in a high-fat diet-induced, obese mouse model. LA100 administration alleviates high-fat diet-induced pathophysiological symptoms, such as body weight gain, high serum glucose and cholesterol level, hepatic lipid accumulation, and adipose inflammation. These results demonstrate concrete anti-obesity benefit in animal models and show promising applications in future clinical studies.

A Bifidobacterium animalis subsp. lactis strain that can suppress Helicobacter pylori: isolation, in vitro and in vivo validation.

The administration of probiotics is an effective approach for treatment of Helicobacter pylori, which is associated with human gastrointestinal diseases and cancers. To explore more effective probiotics for H. pylori infection elimination, bacteria from infant feces were screened in this study. We successfully isolated the Bifidobacterium animalis subsp. lactis strains and evaluated its efficacy to inhibit H. pylori growth in vitro and in vivo. The results showed that a B. animalis strain (named BB18) sustained a high survival rate after incubation in gastric juice. The rapid urease test suggested that B. animalis BB18 reduced pathogen loads in H. pylori-infected Mongolian gerbils. Alleviation of H. pylori infection-induced gastric mucosa damage and decreased levels inflammatory cytokines were observed after the B. animalis BB18 administration. These findings demonstrated that B. animalis BB18 can inhibit H. pylori infection both in vitro and in vivo, suggesting its potential application for the prevention and eradication therapy of H. pylori infection.

Development of a Silicone Rubber Mold with an Innovative Waterfall Cooling Channel.

A conformal cooling channel (CCC) follows the mold core or cavity profile to carry out uniform cooling in the cooling stage. However, the significant pressure drop along the cooling channels is a distinct disadvantage of the CCC. In this study, an innovative waterfall cooling channel (WCC) was proposed and implemented. The WCC cools the injected products via surface contact, replacing the conventional line contact to cool the injected products. The WCC was optimized using numerical simulation software. Silicone rubber molds with two kinds of cooling channels were designed and implemented. The cooling time of the molded part was evaluated using a low-pressure wax injection molding machine. The experimental results of the cooling time of the molded part were compared with the simulation results from numerical simulation software. The results showed that the optimal mesh element count was about 1,550,000 with a mesh size of 1 mm. The simulation software predicted the filling time of the water cup injection-molded product to be approximately 2.008 s. The cooling efficiency for a silicone rubber mold with a WCC is better than that of the silicone rubber mold with a CCC since the core and cavity cooling efficiency is close to 50%. The pressure drop of the WCC is smaller than that of the CCC, which reduces the pressure drop by about 56%. Taking a water cup with a mouth diameter of 70 mm, a height of 60 mm, and a thickness of 2 mm as an example, the experimental results confirmed that the use of the WCC can save the cooling time of the product by about 265 s compared with the CCC. This shows how a WCC can increase cooling efficiency by approximately 17.47%.

Strategies for high cell density cultivation of Akkermansia muciniphila and its potential metabolism.

IMPORTANCE: Currently, there is significant interest in Akkermansia muciniphila as a promising next-generation probiotic, making it a hot topic in scientific research. However, to achieve efficient industrial production, there is an urgent need to develop an in vitro culture method to achieve high biomass using low-cost carbon sources such as glucose. This study aims to explore the high-density fermentation strategy of A. muciniphila by optimizing the culture process. This study also employs techniques such as LC-MS and RNA-Seq to explain the possible regulatory mechanism of high-density cell growth and increased cell surface hydrophobicity facilitating cell colonization of the gut in vitro culture. Overall, this research sheds light on the potential of A. muciniphila as a probiotic and provides valuable insights for future industrial production.

Clinical manifestations and risk factors of shock in children with multisystem inflammatory syndrome.

BACKGROUND: Multisystem inflammatory syndrome in children (MIS-C) is a novel disease associated with COVID-19. The COVID-19 epidemic peaked in May 2022 in Taiwan, and we encountered our first case of MIS-C in late May 2022. We aimed to present patients' clinical manifestations and identify risk factors for shock. METHODS: We included patients diagnosed with MIS-C at two medical centers from May 2022 to August 2022. We separated those patients into two groups according to whether they experienced shock. We collected demographic, clinical manifestation, and laboratory data of the patients and performed statistical analysis between the two groups. RESULTS: We enrolled 28 patients, including 13 (46 %) with shock and 15 (54 %) without shock. The median age was 6.4 years (IQR: 1.9-7.5). In single variable analysis, patients with shock tended to be older, had more neurological symptoms, more conjunctivitis and strawberry tongue, lower lymphocyte count, lower platelet counts, and higher C-reactive protein, higher procalcitonin, higher ferritin, and higher D-dimer levels than those without shock. The area under the ROC curve that used procalcitonin to be the risk factor of shock with MIS-C was 0.815 (95 % CI 0.644 to 0.987). The cutoff value obtained by ROC analysis of procalcitonin was 1.68 ng/mL. With this cutoff, the test characteristics of procalcitonin were as follows: sensitivity 77 %, specificity 93 %, positive predictive value 91 %, negative predictive value 82 %. Multivariable analysis revealed that procalcitonin was the only independent risk factor of shock with MIS-C on admission (OR, 26.00, 95 % CI, 1.01-668.89). CONCLUSIONS: MIS-C patients with high initial procalcitonin levels have higher risks of experiencing shock and may need ICU admission.

Koumine inhibits RANKL-induced ubiquitination and NF-κB activation to prevent ovariectomy and aging-induced bone loss.

Osteoporosis (OP) is a bone remodeling disease characterized by an imbalance between bone resorption and formation. Osteoclasts are the primary therapeutic targets for treating bone destruction. Koumine (KM), the most bioactive component in Gelsemium alkaloids, exhibits antitumor, immunosuppressive, anti-inflammatory, and analgesic properties. However, the effects of bone loss have not been well studied. This study conducted in vitro and in vivo verification experiments on KM. The results showed that KM inhibited bone resorption and tartrate-resistant acid phosphatase positive (TRAP+) osteoclasts development by mature osteoclasts in a dose-dependent manner. Moreover, KM prevented OVX-induced OP in vivo and potentially inhibited ubiquitination, a process closely related to various biological activities, including protein interaction, transcription, and transmembrane signal transduction regulation, especially within the nuclear factor-κB (NF-κB) pathway. Previous studies have demonstrated that several proteins ubiquitination promotes osteoclastogenesis, our study indicated that KM inhibits early NF-κB activation and receptor activator of NF-κB ligand induced ubiquitination, a critical factor in osteoclast differentiation. In conclusion, our research suggests that KM holds potential as an effective therapeutic agent for OP.

Construction of Oligorotaxanes with Hydrogen-Bonded Aramide Macrocycles through Threaded Host-Guest Complexation.

The development of efficient and selective organic synthetic approaches for complex molecules has garnered significant attention due to the need for precise control over molecular structures and functions. Rotaxanes, a type of mechanically interlocked molecules (MIMs), have shown promising applications in various fields including sensing, catalysis, and material science. However, the highly selective synthesis of oligo[n]rotaxanes (mostly n≥3) through controlling host-guest complexation and supramolecular threading assembly process still remains an ongoing challenge. In particular, the utilization of two-dimensional (2D) macrocycles with structural shape-persistency for the synthesis of oligo[n]rotaxanes is rare. In this concept, research on cooperatively threaded host-guest complexation with hydrogen-bonded (H-bonded) aramide macrocycles and selective synthetic protocols of oligo[n]rotaxanes has been summarized. The high efficiency and selectivity in synthesis are ascribed to the synergistic interplay of multiple non-covalent bonding interactions such as hydrogen bonding and intermolecular π-π stacking of macrocycles within the unique supramolecular structure of threaded host-guest complexes. This review focuses on the latest progress in the concepts, synthesis, and properties of H-bonded aramide macrocycle-based oligorotaxanes, and presents an in-depth outlook on challenges in this emerging field.

Anesthesia management for giant pulmonary bullae during emergency intracranial aneurysm embolization: a case report.

INTRODUCTION: An intracranial aneurysm with an acute subarachnoid hemorrhage is an acute neurosurgical disease that often requires emergency surgical intervention. A patient with giant pulmonary bullae is usually elderly and has consistently resisted any surgery, so general anesthesia is required. However, anesthesia management in patients with pulmonary bullae is challenging due to the possibility of spontaneous pneumothorax, a serious complication. Thus, these patients require careful preoperative evaluation and intraoperative management to ensure rapid recovery and minimize adverse effects from anesthesia. CASE DESCRIPTION: A 76-year-old female patient had giant pulmonary bullae and resisted emergency intracranial aneurysm embolization. The patient underwent rapid anesthesia induction after breathing normally through the mask for 5 minutes. A left dual-lumen tracheal catheter No. 33 was quickly inserted and positioned using an electronic fiber bronchoscope. The tracheal catheter was removed under deep anesthesia and replaced with a 3.0 laryngeal mask after the operation. The patient was fully awake and her laryngeal mask was removed. The patient reported no discomfort and was sent back to the ward. CONCLUSIONS: We report the case of a patient with giant pulmonary bullae who underwent emergency non-lung surgery associated with a possible serious complication who was successfully treated with general anesthesia. This approach can be used for patients with similar conditions.